The Wavetrend™ Proximity Card Reader output the tag number and site code as standard wiegand 26/30 bits and printable ASCII RS232.

• Enable or disable internal buffer to prevent the same tag to transmit repeatedly while in the reader’s read range. (100 tags)
• Standalone mode – Relay pulse for every tag read.
• User to set configuration.
• via HyperTerminal:
• Reader RSSI Value.
• Reader Site Code.
• Reader Gain.
• Tag timeout in seconds.
• Standalone pulse length in 100ms increments.
• Alarm pulse length in 100ms increments.
• Buzzer control.

• via Dipswitch:
• Dip 1 -Buffer mode.
• Dip 2 -Wiegand Bits 26 or 30.
• Dip 3 -Key Fob only.
• Dip 4 –Standalone.
• Dip 5 –Alarm.
• Dip 6 -Read switch.
• Dip 7 -Wiegand normal or extended timing.
• Dip 8 -3 second delay for tag transmission.

• External antenna connection available – Standard SMA connector.
• User to control the green and red LED’s by applying GND.
• Yellow LED indicates a tag read (internally controlled).
• Buzzer: Internally or externally controlled by applying GND.
• Tag number and Site code transmitted in selected wiegand bit format and printable ASCII RS232 format.
• Transmit RS232 Site code, Tag number and alarm on alarm event.